Method of Usage-- Portable Power Station B1200 1200W
For the use of 1200W portable power supply, equipped with roller and trolley bar as well as support for remote control APP, the following is a detailed guide:
I. Device Overview
The 1200W portable power supply is an outdoor or home backup power supply that integrates high power output, portability (roller and trolley design) and intelligent control (remote control APP). It is usually suitable for camping, outdoor activities, home emergency and many other scenarios.
II. Preparation
Check the status of the power supply: make sure the power supply is fully charged or has enough power to meet the usage requirements.
Download and install APP YILIANWANWU: Download and install the corresponding remote control APP according to the instructions on the power supply or the instructions on the package, usually these APPs can be found in the app store.
CONNECT THE DEVICE: Make sure the power supply is turned on and establish a connection with the APP by turning on Bluetooth, Wi-Fi. This usually requires setting in the APP and following the prompts to complete the pairing.
III. Usage
1. Remote Control
Start APP: Open the installed remote control APP.
Connect Power: Select the corresponding power device in APP to connect. This may require entering the serial number of the device or Bluetooth/Wi-Fi pairing.
Control Function: After successful connection, APP will display the real-time status of the power supply, including power level and output power. Users can remotely control the power supply on/off and adjust the output mode through APP.
2. Roller and Trolley Use
Moving the power supply: when the power supply needs to be moved, you can use the pull rod to pull it out and lock it in a suitable position. Then, it can be easily moved to the desired position by using the rollers.
Storing the trolley bar: After use, retract the trolley bar and secure it to minimize the space it takes up.
3. Power supply and charging
Power supply: Connect the device to be powered to the mains output socket via the appropriate plug. Make sure the connection is secure and the power is matched.
Charging: When the power supply is low, it can be charged by plugging it into the AC socket on the back using the supplied charger, or by connecting it to a solar panel or using a car charger. Please note that charging time and speed may vary depending on the charging method.
IV. Precautions
Safe Use: Please ensure that you follow the relevant safety regulations during use and avoid using the power supply in a humid, flammable or explosive environment.
Correct Connection: When connecting or disconnecting the power supply, please ensure that the equipment is turned off and all loads are unplugged.
Regular Inspection: Regularly inspect power supply cords, plugs and connectors for damage or looseness, and repair or replace them in a timely manner.
Power Management: Avoid leaving the power supply in a low battery state for long periods of time as this may affect battery life and performance.
With the above steps, you can easily use the 1200W portable power supply and take full advantage of its convenient features such as wheel, pull bar and remote control APP.
